Whilst your Roku media player in conjunction with other devices such as a cable box or Blu-ray player are connected through HDMI with CEC enabled, it is feasible that communication between the gadgets will become unstable. And it often happens that your television may get confused and switch to another gadget whilst you try and handle your Roku streaming player together with your Roku enhanced remote. However, ensure that your streaming device is linked to your Roku account.
This post takes you through a journey on why your TV switches to a different device when trying to use your Roku streaming player. Fasten your seat belts and get set go.
What is HDMI?
HDMI or High-Definition Multimedia Interface is the conventional method to connect audio and video gadgets. Further to handing over each audio and video signals, a single HDMI cable additionally lets gadgets to communicate through CEC.
What is CEC?
CEC stands for Consumer Electronics Control. It is a characteristic of the HDMI standard that lets your HDMI-linked devices to work better together. By swapping data like current volume, which device is delivering video and audio, and which remote-control buttons are being pressed, gadgets can regularly be controlled over HDMI along with a single remote control.
CEC is well known via numerous manufacturer-specific trade names like Samsung Anynet+, Sony Bravia Sync, and LG SimpLink. Other manufacturers such as Vizio and Hitachi make use of the ideal term HDMI-CEC or CEC.
A few Roku players assist a CEC characteristic known as 1-touch play that lets your television automatically switch its active input or source to your Roku device once any button on your remote is pressed.
Before anything else, don’t forget to activate your Roku device. For activation, you have to create a Roku account and link it to your streaming media player via myroku.com web address.
What to Do If My TV is Switching to a Different Source?
On the off chance that your television is switching its active input or source to any other device when you try to handle your Roku player, attempt one or more of the following guidelines until a resolution is found.
1. Disconnect and Reconnect the HDMI Cable
Unplug the HDMI cable which makes a wired connection between your Roku streaming player and your television. Wait for few seconds after which firmly reattach both ends of the HDMI cable, ensuring to utilize the identical HDMI port on your TV. Once done, try accessing support.roku.com website to check whether the issue is resolved or not. In case you are using a damaged HDMI cable, you may come across purple screen Roku error.
2. Power Cycle Your Roku Player and Your TV
Unplug the power cord from your TV and Roku participant. After a time gap of some seconds, plug the cords back in and switch on each gadget.
3. Try Any Other HDMI Input on Your TV
Disconnect the HDMI cable out of your TV and securely connect it to any other HDMI input and check. It is viable that the conduct is not present on all HDMI inputs.
In case you still look at any other tool while controlling your Roku player, go to the next step.
4. Update the TV Firmware
Make certain your TV is associated with the internet and update the firmware. Sometimes, while updating the firmware version, you may get errors. Generally, this happens because your device doesn’t have enough memory. Therefore, it is recommended you to perform Roku 3 micro SD install process carefully. Now, open a web browser and navigate to go.roku.com to see if it loading properly or not. If not, jump to the next solution given below.
5. Connect Your Roku Player Directly For Your TV In Case You Are Using an AVR
On the off chance that your Roku player is hooked up to your television through an HDMI input on your audio/video receiver (AVR), attempt removing your Roku player from AVR and connect it without delay to an available HDMI input on your television.